AC Schnitzer revealed their latest work of art, the GP3.10 GAS POWERED at the IAA. This concept is actually a combination between high-performance, economy and ecology. Because of its power, the tuner offered at the front, 8-pot fixed caliper brakes with perforated and vented discs size 374 x 36 mm and at the rear, a 4-pot brake system with 350 x 24 mm discs. The wheels are under full load in all situations for acceleration and deceleration as well. It features Type IV racing rims. The Aachen wheel manufacturer combines the classic Y-spoke appearance with five striking hollow spokes and bicolor finish, but of course these decorative elements are not available only for the AC Schnitzer GP3.10 GAS POWERED. The concept is equipped with a wheel/tire combination as follows: in the front: 9.0J x 20-inch with tires 245/30 ZR 20 and at the rear 11.5J x 20-inch with tires 315/25 ZR 20. The tuning company recommends high-performance tires from Michelin and Continental.
Driving pleasure has been written large at AC Schnitzer for 20 years. And happily, nothing will change for the 62nd IAA. But this goal can be reached in a totally alternative way, as the launch of the superb AC Schnitzer GP3.10 GAS POWERED shows. This high-performance coupé has LPG (Liquified Petroleum Gas) drive, where power and efficiency, economy and ecology, meet in an exciting study.
And to match the power of the acceleration, there`s the brakes on the AC Schnitzer GP3.10 GAS POWERED: At the front, 8-pot fixed calliper brakes with perforated and vented discs size 374 x 36 mm, at the rear a 4-pot brake system with 350 x 24 mm discs.
For both acceleration and deceleration, it is the wheels which are permanently under full load in all manoeuvres.
Equally breathtaking for the spectator is the first sight of the racing rims Type VI. The latest creation from the Aachen wheel manufacturer combines the classic Y-spoke appearance with five striking hollow spokes and bicolor finish. Naturally these decorative elements are not just available for the AC Schnitzer GP3.10 GAS POWERED.
The AC Schnitzer GP3.10 GAS POWERED is equipped with a wheel/tyre combination in:
front: 9,0J x 20" with tyres 245/30 ZR 20
rear: 11,5J x 20" with tyres 315/25 ZR 20
AC Schnitzer recommends high performance tyres from Continental and Michelin.
|AC Schnitzer GP3.10 GAS POWERED Concept|
|AC Schnitzer GP3.10 at Nardo|
|AC Schnitzer ACS3 3.5d Coupe|
|ACS5 by Ac Schnitzer|
|AC Schnitzer Eagle based on MINI John Cooper Works|
|BMW 3-Series by AC Schnitzer|
|AC Schnitzer BMW E92 3-Series Coupe|
|BMW 135i AC Schnitzer ACS1|
|BMW X6 by AC Schnitzer|
|AC Schnitzer MINI Cooper S Clubman|
|Latest||Cars & News|
|2018 Buick Enclave review|
|2017 Ford F-250 XLT Super Duty review|
|2015 Audi A8 L Chauffeur review|
|2015 McLaren P1 by MSO review|
|2015 Mercedes-Benz S63 AMG Coupe review|
|2020 Porsche Macan GTS comes to fill Macan S and Macan Turbo range|
|Suzuki Jimny is set to get competition from Jeep|
|Toyota Highlander will be available in petrol only or hybrid powertrain|
|Skoda Rapid facelift was unveiled in Russia|
|McLaren 620R is the limited edition street version of the 570S GT4|