Not long ago, BMW introduced the new Z4 roadster and tuner AC Schnitzer presented its interpretation of this roadster at the 2003 Geneva Motor Show offering a complete range of special accessories. When it comes to the powertrain, the tuner is trying to improve the BMW Z4 3.0i. The upgrade refers to a turbine supercharger that eliminates almost completely the running noise. After the process will be finished the model will be able to produce 295 horsepower and 80 Nm of torque. To improve the acceleration of the car there were made some changes to the gearbox. Also, for increase safety, the new BMW Z4 will receive a high performance brake kit for the front axle. The Z4 improved by AC Schnitzer is a roadster that is able to combine the technical and aesthetic characteristics and makes you feel at home, no matter where you are.
The latest member of the BMW family - the new Z4 roadster - has just been introduced to the world's public and at the same time AC Schnitzer presents its interpretation of this Roadster, excellent even in standard form, which already lays justified claim to being a classic of the future.
At the Geneva Motor Show 2003, AC Schnitzer presents a complete range of special accessories covering all areas of the vehicle and highlighting the authentic Roadster feeling. All components on show are currently in the development or fine-tuning stage; they will however all be available during the Spring.
For the power plant of the most powerful variant at present - the BMW Z4 3.0i - a performance upgrade is already "in the pipeline". A development achieved in close collaboration with the BMW Motorsport Team Schnitzer, Freilassing.
The power of the AC Schnitzer Z4 Compressor is increased by supercharger technology. The heart of the upgrade is a turbine supercharger which thanks its toothed belt drive allows almost noiseless running. Only in the upper speed ranges is the characteristic compressor note - totally desirably! - produced.
The geometric design of this supercharge means it only needs maximum 38.000 rpm to achieve a boost pressure of 0.35 bar at an engine speed of 6.500 rpm. This increases the output of the standard power plant to a stately 295 HP / 217 kW and brings the maximum torque up by 80 Nm.
Thanks to the excellent efficiency of the supercharger, there is no need for an extra charge cooler. The high-tech bearings are permanently lubricated via an autonomous, dedicated oil reservoir. This has the advantage of allowing the two oil circuits to work independently.
The scope of supply of the AC Schnitzer supercharger kit performance upgrade also includes the full stainless steel AC Schnitzer sports rear silencer with chromed tailpipe trim in the new racing design and a modified control unit program. The performance upgrade is naturally also available for other vehicles with the M54 B30 engine.
Even without the engine tuning - for the BMW Z4 2.5 or 3.0i - we recommend fitting the AC Schnitzer sports rear silencer which optimises gas flow and hence response behaviour. As a "smaller alternative" the tailpipe trim in racing design completes the package.
Faster and more precise gear changes promote the adrenalin surge and improve the car's acceleration. So for the manual BMW Z4 3.0i we have adapted the AC Schnitzer Short Shift.
To ensure safe control over the driving power of the new BMW Z4 at all times, a special high performance brake kit for the front axle is in development. The internally vented and slotted brake discs measure 334 millimetres in diameter and are 32 millimetres thick. The special calipers are fitted with two 42 mm diameter pistons. Naturally the standard ABS system is retained in full.
Our engineers also invest great efforts and their entire know-how from motorsport in developing the sports-safe suspension setting.
In extensive tests on race tracks and on public roads, a complete suspension concept has been developed which consists of the AC Schnitzer sports suspension, special anti-roll bar kit and the racing strut brace. The complete concept, the components of which can also be fitted individually, ensures sporting handling while retaining the high standard of driving comfort.
The suspension concept also includes the AC Schnitzer Type II and Type III alloys and racing rims in multipiece design. Specially selected for the Z4 roadster are various wheel and tyre combinations up to size 8.5J x 19" offset 43 with tyres 235/35 R 19 on the front axle and 9.0J x 19" offset 37 with tyres 265/30 R 19 on the rear. For tyres, we recommend high performance types from Continental and Michelin.
The high technical standards we set for our products are also evident from the bodystyling of the AC Schnitzer Z4 roadster. It was a particular challenge to pick up the styling of the Z4 roadster and continue its lines with subtle emphasis while retaining its discreet elegance.
The result is a made-to-measure outfit for the BMW Z4 roadster which fulfils all these attributes. The front part is enhanced by an exciting design of front spoiler attached to the standard front skirt. And it realises even more downforce on the front axle.
The smooth connection between the front and rear is created by the AC Schnitzer side skirts adapted to the contours of the Z4. The integrated cooling ducts also guide the air flow directly to the rear brakes.
Particularly eye-catching are the side-mounted deflectors with integral flashers for the indicators, which with their chromed ribs give a totally new appearance.
The two-piece rear wing, the triangular sections of which are mounted separately left and right on the boot, sets totally new accents.
The overall appearance is rounded off by the new AC Schnitzer rear skirt, which not only harmoniously integrates the sports rear silencer into the rear end but at the same time gives the vehicle a far more powerful look.
Exclusivity is the watchword in the cockpit of the AC Schnitzer Z4 roadster: as well as a silver carbon-fibre interior, matching door sill trims and an ergonomically designed AC Schnitzer airbag sports steering wheel, the accents are set by the aluminium accessories. Choose from the pedal set with matching footrest, the handbrake handle and - for manual models - matching gear knob. For automatics we are currently developing a carbon-fibre selector. Last but not least, foot mats are available in high quality velours with the AC Schnitzer logo.
The AC Schnitzer Z4 is a thoroughbred roadster which combines all technical and aesthetic characteristics. On the track, cruising the country lanes or in the city - wherever you go, it's at home.
|ACS5 by Ac Schnitzer|
|AC Schnitzer GP3.10 GAS POWERED Concept|
|BMW 3-Series by AC Schnitzer|
|AC Schnitzer BMW E92 3-Series Coupe|
|AC Schnitzer ACS3 3.5d Coupe|
|BMW X6 by AC Schnitzer|
|AC Schnitzer Eagle based on MINI John Cooper Works|
|AC Schnitzer MINI Cooper S Clubman|
|AC Schnitzer Mini Cooper R56|
|AC Schnitzer 2008 BMW 6-series|
|Latest||Cars & News|
|2018 Buick Enclave review|
|2017 Ford F-250 XLT Super Duty review|
|2015 Audi A8 L Chauffeur review|
|2015 McLaren P1 by MSO review|
|2015 Mercedes-Benz S63 AMG Coupe review|
|2020 Porsche Macan GTS comes to fill Macan S and Macan Turbo range|
|Suzuki Jimny is set to get competition from Jeep|
|Toyota Highlander will be available in petrol only or hybrid powertrain|
|Skoda Rapid facelift was unveiled in Russia|
|McLaren 620R is the limited edition street version of the 570S GT4|